Pressed Plastic-bonded Permanent Magnet Market Trends and Forecast
The future of the global pressed plastic-bonded permanent magnet market looks promising with opportunities in the home appliance, automotive, medical device, and 3C product markets. The global pressed plastic-bonded permanent magnet market is expected to grow with a CAGR of 8.7% from 2025 to 2031. The major drivers for this market are the increasing demand for energy-efficient motors, the rising adoption of electric vehicles, and the growing need for compact magnetic solutions.

  • Lucintel forecasts that, within the type category, spray coating is expected to witness higher growth over the forecast period.
  • Within the application category, automotive is expected to witness the highest growth.
  • In terms of region, APAC is expected to witness the highest growth over the forecast period.



Emerging Trends in the Pressed Plastic-bonded Permanent Magnet Market
With the development of the pressed plastic-bonded permanent magnet market, various emerging trends are redesigning its contours. These trends are largely influenced by the increasing need for energy-efficient products, the development of technologies in magnet manufacturing, and environmental sustainability measures. Focusing on these trends is imperative for market players to remain competitive and leverage emerging opportunities. The following are some of the most important emerging trends that will contribute significantly to the market.

  • Growing Demand for Electric Vehicles: One of the primary trends in the pressed plastic-bonded permanent magnet industry is the growth in electric vehicle (EV) production. With original equipment manufacturers (OEMs) moving toward EVs, demand for high-performance magnets has risen strongly, especially in motors and powertrains. The magnets are critical for enhancing the efficiency and performance of electric drivetrains, which are most important for EV success. The global push for sustainable transportation has led to an increase in the demand for magnets that are energy-efficient, lightweight, and durable, further driving innovation in magnet manufacturing.
  • Technological Advancements in Manufacturing Processes: Technological innovations in manufacturing processes are revolutionizing the pressed plastic-bonded permanent magnet industry. Automation and precision manufacturing processes have greatly enhanced the scalability and efficiency of magnet manufacturing. Moreover, innovations in 3D printing and other additive manufacturing processes are enabling the creation of more complex magnet geometries with improved magnetic properties. These technologies are lowering the cost of production while enhancing the performance of the magnets, making them more accessible to a broad spectrum of applications.
  • Emphasis on Sustainability: Sustainability is an emerging theme in the pressed plastic-bonded permanent magnet industry, driven by mounting regulatory pressures and consumers’ demand for environmentally friendly alternatives. Producers are emphasizing the production of magnets using sustainable, recyclable, or biodegradable materials. Furthermore, cleaner production practices are contributing to decreasing the environmental footprint of magnet production. The emphasis on sustainability is especially crucial in industries such as renewable energy, where magnets are employed in wind turbines and other clean technologies.
  • Integration of Magnets in Renewable Energy Systems: The use of pressed plastic-bonded permanent magnets in renewable energy systems, especially wind turbines, is emerging as a major trend. Magnets play a vital role in the efficient functioning of wind turbines, and the increasing need for renewable energy solutions has increased the demand for high-performance magnets. The drive for sustainable and renewable energy sources is likely to persist, further increasing the demand for magnets with high magnetic properties, reliability, and efficiency in energy generation systems.
  • Tailoring of Magnets to Individual Applications: Tailoring is an increasingly significant trend in the pressed plastic-bonded permanent magnet industry. More tailored solutions for individual applications are being provided by manufacturers in sectors like automotive, consumer electronics, and industrial equipment. Tailoring enables optimization of magnet performance, for example, tailoring magnetic properties, size, and shape to suit the specific needs of each application. As companies keep asking for greater efficiency and performance, customization will be an important differentiator for manufacturers to compete in the market.


These emerging trends, such as rising demand for electric vehicles, advances in manufacturing technology, sustainability focus, integration in renewable energy systems, and customization, are transforming the pressed plastic-bonded permanent magnet market. With these trends advancing, they will lead to innovation, enhance performance, and broaden the use of pressed plastic-bonded permanent magnets across different industries.

Recent Developments in the Pressed Plastic-bonded Permanent Magnet Market
Recent trends in the pressed plastic-bonded permanent magnet industry mirror the continuous improvement in manufacturing technologies, growing demand for high-performance magnets, and a high emphasis on sustainability. These trends are defining the future of the industry and fueling its growth. The following are the key developments that are significantly contributing to the evolution of the market.

  • Improvements in Magnet Composition: Manufacturers are concentrating on developments in magnet composition for enhanced performance and lower production costs. New formulations of magnets, including new plastic materials and rare-earth elements, are enhancing the magnetic characteristics of pressed plastic-bonded magnets. The developments allow magnets to cope with growing demands from electric vehicle, renewable energy, and consumer electronics industries. The creation of these high-performance compositions also is contributing to the improvement in the durability and heat endurance of magnets, which can be used for even more demanding applications.
  • Creation of Eco-friendly Manufacturing Processes: Sustainability is a key issue in the pressed plastic-bonded permanent magnet industry, as firms are becoming more environmentally friendly in their manufacturing processes. This involves the use of recycled content and minimizing energy usage in the manufacturing process. Environmentally friendly magnets are also being created to minimize the carbon footprint of the manufacturing process without compromising on performance for high-technology applications. These trends coincide with worldwide efforts to reduce the carbon footprint of industrial processes and are likely to grow in significance as environmental standards become stricter.
  • Expansion in the Automotive Sector: The auto industry, and more specifically the electric vehicle segment, is stimulating demand for pressed plastic-bonded permanent magnets. Producers are ramping up production to satisfy increasing demand for high-performance magnets in EV motors and powertrains. Electric vehicle growth is forcing firms to create more energy-efficient, lighter, and more powerful magnets. This advancement is essential because automakers want to maximize EV performance and improve battery life.
  • Greater Research and Development Investment: Research and development (R&D) investment is one of the major developments in the pressed plastic-bonded permanent magnet industry. Businesses are investing to enhance magnet performance, boost production efficiency, and create new applications for these magnets. R&D is concentrating on enhancing the magnetic characteristics, longevity, and thermal resistance of magnets as well as new production processes, including 3D printing, to enhance scalability and production cost reduction. These developments are critical for remaining competitive in the marketplace.
  • Move toward Customization and Tailored Solutions: Customization of pressed plastic-bonded permanent magnets is an increasingly important development as producers strive to address the unique requirements of various industries. Customized solutions enable magnet performance to be optimized according to the distinctive demands of uses like robotics, industrial equipment, and consumer electronics. Through customized products, producers are able to advance customer satisfaction and distinguish themselves in a competitive market.


Recent advancements in the pressed plastic-bonded permanent magnet industry, including improvements in magnet composition, green production methods, growth in the auto industry, higher R&D spending, and the move toward customization, are influencing the growth of the market. These advancements are improving magnet performance and broadening their uses across various industries.
Strategic Growth Opportunities in the Pressed Plastic-bonded Permanent Magnet Market
The pressed plastic-bonded permanent magnet market offers a range of strategic growth opportunities powered by advances in manufacturing technologies, growing demand in electric vehicles, and greater emphasis on sustainability. The opportunities exist across major applications including automotive, renewable energy, and consumer electronics. The following key growth opportunities identify how companies can leverage the increasing demand for high-performance magnets.

  • Electric Vehicle Market Growth: The expanding electric vehicle (EV) market offers a large growth prospect for pressed plastic-bonded permanent magnets. As the auto industry moves toward electric drivetrains, demand for high-performance magnets applied in EV powertrains and motors is on the rise. The opportunity for manufacturers can be exploited by creating advanced magnets that enhance motor efficiency and decrease energy consumption, essentially boosting electric vehicle performance. The worldwide movement toward EVs will propel ongoing demand for the magnets.
  • Renewable Energy Systems: As a technology, renewable energy, specifically solar and wind power, can provide a large growth market for compressed plastic-bonded permanent magnets. These magnets are crucial for the effective functioning of wind turbines, and as demand for renewable energy grows around the world, so will the demand for high-quality magnets. Companies can widen their product range by developing magnets with energy generation applications in mind, like electric motors in wind turbines. The emphasis on clean energy solutions offers a growth opportunity over the long term in this segment.
  • Consumer Electronics: Consumer electronics is another important growth area for pressed plastic-bonded permanent magnets. Magnets are utilized in a wide range of applications, such as appliance motors and mobile device sensors. With increasing consumer demand for more efficient and smaller electronic products, demand for high-performance magnets also increases. Companies can take advantage of this by creating smaller, lighter magnets with higher magnetic properties, which allow for more efficient and smaller electronic devices.
  • Automated Industrial Machinery: The growth in automation of industrial equipment is a growth opportunity for pressed plastic-bonded permanent magnets. Magnets are applied in motors, sensors, and other devices in automated systems, which are widely applied in manufacturing, logistics, and other industries. With growth in automation, the need for accurate and durable magnets will increase further. Companies can concentrate on producing magnets with high levels of reliability and performance needed in industrial applications.
  • Custom Magnet Solutions for Specialized Applications: Providing custom magnet solutions is a strategic growth area for pressed plastic-bonded permanent magnet companies. By customizing magnets to meet the unique requirements of customers, manufacturers can stand out in a competitive market. Specialized applications in industries like aerospace, medical devices, and robotics demand specific magnet characteristics, and thus there is a niche for custom magnet solutions. Companies that are able to offer customized products are well placed to achieve a competitive advantage in these high-demanding applications.


Strategic growth prospects in the pressed plastic-bonded permanent magnet industry involve growth in electric cars, renewable energy systems, consumer electronics, automatic industrial equipment, and specialty magnet solutions. Taking advantage of these opportunities will enable manufacturers to position themselves for success in an increasingly competitive and dynamic industry.
Pressed Plastic-bonded Permanent Magnet Market Driver and Challenges
The market for pressed plastic-bonded permanent magnets is driven by several technological, economic, and regulatory drivers and challenges. It is important to understand these factors for companies that want to navigate the intricacies of the industry. The following are the key drivers and challenges that are driving the growth and development of the market.
The factors responsible for driving the pressed plastic-bonded permanent magnet market include:
1. Technological Advances in Magnet Manufacturing: Advances in technology for producing magnets, including better manufacturing processes and automation, are propelling market growth. The new technologies allow manufacturers to produce higher-performance magnets with improved magnetic properties and performance, addressing growing demand for high-performance magnets in various industries, including automotive, renewable energy, and consumer electronics. New production technologies are lowering costs and enhancing production efficiency, further increasing market potential.
2. Demand for Energy-efficient Solutions: The international need for energy-efficient technologies is a major push for the pressed plastic-bonded permanent magnet industry. Automotive, renewable energy, and consumer electronics industries are increasingly looking for energy-efficient, high-performance magnets to cut down on power usage and enhance efficiency in general. The increased emphasis on energy conservation and the drive for green technologies is propelling the need for improved magnets across numerous applications.
3. Transition of the Automotive Industry towards Electric Vehicles: The transition to electric vehicles (EVs) is one of the key drivers of demand for pressed plastic-bonded permanent magnets. EV drivetrains and motors need high-performance magnets to improve efficiency, minimize weight, and optimize overall performance. As the automotive sector adopts EVs and hybrid vehicles, demand for advanced magnets in motors and powertrains will increase, presenting a substantial growth opportunity for manufacturers.
4. Growth in Renewable Energy Demand: The rising need for renewable energy, especially wind power, is propelling the demand for pressed plastic-bonded permanent magnets. Magnets are crucial components used in wind turbines, and with the overall movement toward renewable energy, the demand for effective and long-lasting magnets is on the rise. This trend offers a very important growth opportunity for the market as more players are now keen on manufacturing magnets that are specifically suited for energy generation use.
5. Industrial Automation Growth: Industrial automation growth in manufacturing industries is boosting the demand for pressed plastic-bonded permanent magnets. The magnets are employed in motors, sensors, and other parts of automated systems. As manufacturing industries implement automated systems to enhance efficiency and minimize labor expenses, the demand for quality magnets that enable these systems keeps rising, fueling market growth.
Challenges in the pressed plastic-bonded permanent magnet market are:
1. Raw Material Cost Fluctuations: Raw material price fluctuations, including those of rare-earth elements and plastics, pose a challenge to producers in the pressed plastic-bonded permanent magnet industry. These materials are crucial for the manufacture of high-performance magnets, and their price volatility can affect production costs and profit margins. Producers have to navigate these price fluctuations by streamlining production processes and seeking alternative materials to achieve cost stability.
2. Economic Downturns: Economic slumps, e.g., recessions or market slowdowns, can adversely affect demand for magnets in industries such as automotive and consumer electronics. Lower investment in these sectors during economic slumps could result in slower market growth and fewer opportunities for magnet manufacturers. Economic uncertainty can cause difficulties for companies attempting to achieve steady demand for their products.
3. Regulatory Pressures: Stringent safety and environmental regulations across many countries create challenges for players in the pressed plastic-bonded permanent magnet manufacturing market. To comply with these regulations, manufacturers will need to invest in cleaner production systems or redesign their products to conform to new regulations. Such regulatory forces will drive costs of operations higher and demand substantial investment in R&D.
The market for pressed plastic-bonded permanent magnets is influenced by technological developments, energy-saving solutions demand, the move towards electric vehicles, renewable energy growth, and industrial automation. Raw material price volatility, economic recessions, and regulatory pressures, though, need to be managed. Through awareness of these drivers and challenges, manufacturers can formulate strategies that leverage opportunities and cope with the intricacies of the market.
List of Pressed Plastic-bonded Permanent Magnet Companies
Companies in the market compete on the basis of product quality offered. Major players in this market focus on expanding their manufacturing facilities, R&D investments, infrastructural development, and leverage integration opportunities across the value chain. With these strategies pressed plastic-bonded permanent magnet companies cater increasing demand, ensure competitive effectiveness, develop innovative products & technologies, reduce production costs, and expand their customer base. Some of the pressed plastic-bonded permanent magnet companies profiled in this report include-

  • Daido Electronics
  • Max Baermann
  • Mate
  • Tokyo Ferrite
  • Bomatec
  • IMA
  • Sura Magnets
  • MS-Schramberg
  • Evitron
  • Magnetfabrik Bonn



Pressed Plastic-bonded Permanent Magnet Market by Segment
The study includes a forecast for the global pressed plastic-bonded permanent magnet market by type, application, and region.
Pressed Plastic-bonded Permanent Magnet Market by Type [Value from 2019 to 2031]:

  • Electrophoresis Coating
  • Spray Coating
  • Others



Pressed Plastic-bonded Permanent Magnet Market by Application [Value from 2019 to 2031]:

  • Home Appliances
  • Automotive
  • Medical Devices
  • 3C Products
  • Others



Pressed Plastic-bonded Permanent Magnet Market by Region [Value from 2019 to 2031]:

  • North America
  • Europe
  • Asia Pacific
  • The Rest of the World



Country Wise Outlook for the Pressed Plastic-bonded Permanent Magnet Market
The pressed plastic-bonded permanent magnet market is witnessing tremendous growth as a result of the growing demand for high-performance magnets across different applications, such as electric vehicles (EVs), renewable energy systems, and consumer electronics. These magnets leverage the advantages of plastic and magnetic materials to provide enhanced cost-effectiveness, flexibility, and durability. The growth of the market is most strongly felt in important countries like the United States, China, Germany, India, and Japan, where technological improvements in manufacturing technology and growing demands for energy-saving solutions are promoting innovation. Subsequent sections highlight major developments in these countries.

  • United States: The pressed plastic-bonded permanent magnet market in the United States is rising sharply, driven by the widening electric vehicle (EV) market and renewable energy technologies. Manufacturers are working to create magnets with improved magnetic properties and thermal resistance to cater to the demands of the expanding electric motor sector. More investment in research and development (R&D) has resulted in enhanced production processes, enabling mass production of magnets. The U.S. also prioritizes green practices, with businesses increasingly using environmentally friendly materials and processes in the manufacture of these magnets.
  • China: China is dominating the world market for pressed plastic-bonded permanent magnets due to its leadership in the production of electric vehicles and renewable energy equipment. China has developed advanced technologies in manufacturing magnets, enhancing efficiency and decreasing costs. The Chinese government has also been encouraging developments in green technology, such as the production of high-performance and sustainable magnets for wind turbines and EVs. The continued industrialization and swift uptake of electric cars further fuel the need for sophisticated permanent magnets in China, which remains a significant exporter to world markets.
  • Germany: Germany is well established in the pressed plastic-bonded permanent magnet industry, especially in the automotive and industrial sectors. German companies are concentrating on manufacturing high-efficiency magnets for use in automotive applications, especially electric drivetrains. With a great focus on precision engineering, Germany is pioneering advancements in magnet manufacturing technologies, enhancing performance as well as sustainability. The nation’s automotive sector, which is turning electric, has boosted demand for high-performance permanent magnets significantly. Moreover, Germany is working towards minimizing the environmental footprint of magnet manufacturing through the use of greener production methods.
  • India: India’s pushed plastic-bonded permanent magnet market is expanding steadily, fueled by the rising need for energy-efficient solutions across different industries like consumer electronics and electric vehicles. The emphasis on green technologies by the Indian government and encouraging electric vehicle uptake is fueling the growth of this market. Indian producers are investing to improve their manufacturing capabilities, and R&D is aimed at enhancing the performance and cost-effectiveness of magnets. India’s role as an important player in the global electronics manufacturing supply chain also favors the development of the pressed plastic-bonded permanent magnet market.
  • Japan: Japan has been a pioneer in the creation of advanced materials for years, and its pressed plastic-bonded permanent magnet market is no different. The nation has made considerable advancements in the manufacture of high-performance magnets, especially for use in robotics, automotive technologies, and renewable energy. Japan’s automobile industry, among the biggest in the world, is transitioning towards electric cars, generating a demand for high-quality magnets. Japan’s intensive emphasis on sustainability and innovation is compelling the invention of cleaner, more efficient methods of magnet manufacturing, making the industry competitive around the world.


Features of the Global Pressed Plastic-bonded Permanent Magnet Market
Market Size Estimates: Pressed plastic-bonded permanent magnet market size estimation in terms of value ($B).
Trend and Forecast Analysis: Market trends (2019 to 2024) and forecast (2025 to 2031) by various segments and regions.
Segmentation Analysis: Pressed plastic-bonded permanent magnet market size by type, application, and region in terms of value ($B).
Regional Analysis: Pressed plastic-bonded permanent magnet market breakdown by North America, Europe, Asia Pacific, and Rest of the World.
Growth Opportunities: Analysis of growth opportunities in different type, application, and regions for the pressed plastic-bonded permanent magnet market.
Strategic Analysis: This includes M&A, new product development, and competitive landscape of the pressed plastic-bonded permanent magnet market.
Analysis of competitive intensity of the industry based on Porter?s Five Forces model.


This report answers following 11 key questions:
Q.1. What are some of the most promising, high-growth opportunities for the pressed plastic-bonded permanent magnet market by type (electrophoresis coating, spray coating, and others), application (home appliances, automotive, medical devices, 3C products, and others), and region (North America, Europe, Asia Pacific, and the Rest of the World)?
Q.2. Which segments will grow at a faster pace and why?
Q.3. Which region will grow at a faster pace and why?
Q.4. What are the key factors affecting market dynamics? What are the key challenges and business risks in this market?
Q.5. What are the business risks and competitive threats in this market?
Q.6. What are the emerging trends in this market and the reasons behind them?
Q.7. What are some of the changing demands of customers in the market?
Q.8. What are the new developments in the market? Which companies are leading these developments?
Q.9. Who are the major players in this market? What strategic initiatives are key players pursuing for business growth?
Q.10. What are some of the competing products in this market and how big of a threat do they pose for loss of market share by material or product substitution?
Q.11. What M&A activity has occurred in the last 5 years and what has its impact been on the industry?