Table of Content


Chapter 1 Methodology
1.1 Methodology
1.2 Market definitions
1.3 Market estimates & forecast parameters
1.4 Data sources
1.4.1 Primary
1.4.2 Secondary
1.4.2.1 Paid sources
1.4.2.2 Public sources
Chapter 2 Executive Summary
2.1 Distribution transformer industry 360 degree synopsis, 2018 - 2030
2.1.1 Business trends
2.1.2 Core trends
2.1.3 Winding trends
2.1.4 Installation trends
2.1.5 Cooling trends
2.1.6 Insulation trends
2.1.7 Phase trends
2.1.8 Rating trends
2.1.9 Mounting trends
2.1.10 Application trends
2.1.11 Regional trends
Chapter 3 Distribution Transformer Industry Insights
3.1 Industry ecosystem analysis
3.1.1 Vendor Matrix
3.2 Innovation & technology landscape
3.2.1 Imefy Group
3.2.2 Siemens
3.2.3 Celme S.r.l
3.2.4 General Electric
3.2.5 Hammond Power
3.2.6 ABB
3.3 Regulatory landscape
3.3.1 North America
3.3.1.1 U.S.
3.3.1.1.1 Electricity reliability standards
3.3.1.1.2 National Electrical Manufacturers Association (NEMA) Standards
3.3.1.1.3 Institute of Electrical and Electronics Engineers
3.3.1.1.4 Location and Arrangement of Transformers and Regulators
3.3.1.1.4.1 Outdoor Installations
3.3.1.1.4.2 Indoor Installations
3.3.1.1.5 Short-Circuit Protection of Transformers
3.3.1.1.6 Standards
3.3.1.2 Canada
3.3.2 Europe
3.3.2.1 EU Eco-design Directive
3.3.2.1.1 Requirement for medium transformers
3.3.2.1.2 Requirement for dry transformers
3.3.2.1.3 Requirement for large transformers
3.3.2.1.4 Measurement and calculation method
3.3.2.1.5 Annex 1
3.3.2.1.6 Annex 2
3.3.2.1.7 Annex 3
3.3.2.1.8 Annex 4
3.3.2.2 Commission Regulation (EU) 2019/1783
3.3.2.2.1 Regulation (EU) No 548/2014 is amended as follows:
3.3.2.2.2 Annex 1: Annex I is replaced by the following
3.3.2.2.3 Annex 2: Annex II is replaced by the following
3.3.2.2.4 Annex 3: Annex III is replaced by the following
3.3.2.2.5 Annex 4: Annex IV is replaced by the following:
3.3.2.3 UK
3.3.3 Asia Pacific
3.3.3.1 China
3.3.3.1.1 National Laws (Approved by the National People’s Congress)
3.3.3.1.2 The Electric Power Law of the People’s Republic of China
3.3.3.1.3 Electrical and Mechanical Services Department (EMSD)
3.3.3.1.4 Standards
3.3.3.1.4.1 International Electrotechnical Commission (IEC) and British standards
3.3.3.2 India
3.3.3.2.1 Bureau of Indian Standards (BIS)
3.3.3.2.2 Amendments
3.3.3.2.2.1 Technical standards for construction of electrical plants and lines (Regulation 37)
3.3.3.2.2.2 Technical standards for construction of sub-stations and switchyards (Regulation 41-C)
3.3.3.2.3 Regulation 43
3.3.3.2.4 Regulation 54
3.3.3.2.5 Energy Conservation Building Code – Transformers
3.3.3.2.6 Bureau of Indian Standards (BIS)
3.4 COVID- 19 impact on the industry outlook
3.5 Industry impact forces
3.5.1 Growth drivers
3.5.1.1 North America
3.5.1.1.1 Refurbishment demand for existing grid infrastructure
3.5.1.1.2 Rising infrastructural spending
3.5.1.2 Europe
3.5.1.2.1 Growing deployment of renewable energy
3.5.1.2.2 Upgradation of existing grid network
3.5.1.3 Asia Pacific
3.5.1.3.1 Large-scale renewable integration
3.5.1.3.2 Increasing demand for electricity
3.5.1.4 Middle East, Africa & Latin America
3.5.1.4.1 Escalating demand for reliable & continuous electricity
3.5.1.4.2 Growing investment toward expansion of electricity networks
3.5.2 Industry pitfalls & challenges
3.5.2.1 High initial cost
3.6 Growth potential analysis
3.7 Porter’s Analysis
3.7.1 Bargaining power of suppliers
3.7.2 Bargaining power of buyers
3.7.3 Threat of new entrants
3.7.4 Threat of substitutes
3.8 Competitive landscape, 2021
3.8.1 Strategy dashboard
3.8.1.1 ABB
3.8.1.1.1 Installation/supply
3.8.1.1.2 Divestment
3.8.1.1.3 Agreement
3.8.1.1.4 Product launch
3.8.1.1.5 Installation/supply
3.8.1.1.6 Acquisition
3.8.1.2 Mitsubishi Electric Corporation
3.8.1.2.1 Product deployment
3.8.1.2.2 Installation/supply
3.8.1.3 Voltamp
3.8.1.3.1 Contract/supply
3.8.1.4 General Electric
3.8.1.4.1 Installation/supply
3.8.1.4.2 Agreement
3.8.1.4.3 Award
3.8.1.4.4 Project completion
3.8.1.4.5 Collaboration
3.8.1.4.6 Contract/supply
3.8.1.5 Elsewedy Electric
3.8.1.5.1 Acquisition
3.8.1.5.2 Contract
3.8.1.6 Eaton
3.8.1.6.1 Acquisition
3.8.1.7 Celme S.r.l
3.8.1.7.1 Product deployment
3.8.1.8 Siemens
3.8.1.8.1 Installation/supply
3.8.1.8.2 Acquisition
3.8.1.8.3 Product development
3.8.1.8.4 Joint venture
3.8.1.9 CG Power and Industrial Solutions Limited
3.8.1.9.1 Installation/supply
3.8.1.10 Ormazabal
3.8.1.10.1 Installation/supply
3.8.1.10.2 Product development
3.8.1.10.3 Agreement
3.8.1.10.4 Product installation
3.8.1.11 Hyosung Heavy Industries
3.8.1.11.1 Investment
3.8.1.12 Schneider Electric
3.8.1.12.1 Acquisition
3.8.1.12.2 Installation/supply
3.8.1.12.3 Partnership
3.8.1.13 Toshiba Corporation
3.8.1.13.1 Installation/supply
3.8.1.14 Bharat Heavy Electricals Limited
3.8.1.14.1 Partnership
3.8.1.14.2 Agreement
3.9 PESTEL Analysis
Chapter 4 Distribution Transformer Market, By Core
4.1 Distribution transformer market share by core, 2021 & 2030
4.2 Closed
4.2.1 Global market from closed, 2018 - 2030
4.2.2 Global market from closed, by region, 2018 - 2030
4.3 Shell
4.3.1 Global market from shell, 2018 - 2030
4.3.2 Global market from shell, by region, 2018 - 2030
4.4 Berry
4.4.1 Global market from berry, 2018 - 2030
4.4.2 Global market from berry, by region, 2018 - 2030
Chapter 5 Distribution Transformer Market, By Winding
5.1 Distribution transformer market share by winding, 2021 & 2030
5.2 Two-winding
5.2.1 Global market from two-winding, 2018 - 2030
5.2.2 Global market from two-winding, by region, 2018 - 2030
5.3 Auto-transformer
5.3.1 Global market from auto-transformer, 2018 - 2030
5.3.2 Global market from auto-transformer, by region, 2018 - 2030
Chapter 6 Distribution Transformer Market, By Installation
6.1 Distribution transformer market share by installation, 2021 & 2030
6.2 Outdoor
6.2.1 Global market from outdoor, 2018 - 2030
6.2.2 Global market from outdoor, by region, 2018 - 2030
6.3 Indoor
6.3.1 Global market from indoor, 2018 - 2030
6.3.2 Global market from indoor, by region, 2018 - 2030
Chapter 7 Distribution Transformer Market, By Cooling
7.1 Distribution transformer market share by cooling, 2021 & 2030
7.2 Dry type
7.2.1 Global market from dry type, 2018 - 2030
7.2.2 Global market from dry type, by region, 2018 - 2030
7.2.3 Self air
7.2.3.1 Global market from self air, 2018 - 2030
7.2.3.2 Global market from self air, by region, 2018 - 2030
7.2.4 Air blast
7.2.4.1 Global market from air blast, 2018 - 2030
7.2.4.2 Global market from air blast, by region, 2018 - 2030
7.3 Oil-immersed
7.3.1 Global market from oil-immersed, 2018 - 2030
7.3.2 Global market from oil-immersed, by region, 2018 - 2030
7.3.3 Self cooled
7.3.3.1 Global market from self cooled, 2018 - 2030
7.3.3.2 Global market from self cooled, by region, 2018 - 2030
7.3.4 Water cooled
7.3.4.1 Global market from water cooled, 2018 - 2030
7.3.4.2 Global market from water cooled, by region, 2018 - 2030
7.3.5 Forced oil
7.3.5.1 Global market from forced oil, 2018 - 2030
7.3.5.2 Global market from forced oil, by region, 2018 - 2030
7.3.6 Others
7.3.6.1 Global market from others, 2018 - 2030
7.3.6.2 Global market from others, by region, 2018 - 2030
Chapter 8 Distribution Transformer Market, By Insulation
8.1 Distribution transformer market share by insulation, 2021 & 2030
8.2 Gas
8.2.1 Global market from gas, 2018 - 2030
8.2.2 Global market from gas, by region, 2018 - 2030
8.3 Oil
8.3.1 Global market from oil, 2018 - 2030
8.3.2 Global market from oil, by region, 2018 - 2030
8.4 Solid
8.4.1 Global market from solid, 2018 - 2030
8.4.2 Global market from solid, by region, 2018 - 2030
8.5 Air
8.5.1 Global market from air, 2018 - 2030
8.5.2 Global market from air, by region, 2018 - 2030
8.6 Others
8.6.1 Global market from others, 2018 - 2030
8.6.2 Global market from others, by region, 2018 - 2030
Chapter 9 Distribution Transformer Market, By Phase
9.1 Distribution transformer market share by phase, 2021 & 2030
9.2 Single
9.2.1 Global market from single, 2018 - 2030
9.2.2 Global market from single, by region, 2018 - 2030
9.3 Three
9.3.1 Global market from three, 2018 - 2030
9.3.2 Global market from three, by region, 2018 - 2030
Chapter 10 Distribution Transformer Market, By Rating
10.1 Distribution transformer market share by rating, 2021 & 2030
10.2 ? 2.5 MVA
10.2.1 Global market from ? 2.5 MVA, 2018 - 2030
10.2.2 Global market from ? 2.5 MVA, by region, 2018 - 2030
10.3 2.6 MVA to 10 MVA
10.3.1 Global market from 2.6 MVA to 10 MVA, 2018 - 2030
10.3.2 Global market from 2.6 MVA to 10 MVA, by region, 2018 - 2030
10.4 > 10 MVA
10.4.1 Global market from > 10 MVA, 2018 - 2030
10.4.2 Global market from > 10 MVA, by region, 2018 - 2030
Chapter 11 Distribution Transformer Market, By Mounting
11.1 Distribution transformer market share by mounting, 2021 & 2030
11.2 Pad
11.2.1 Global market from pad, 2018 - 2030
11.2.2 Global market from pad, by region, 2018 - 2030
11.3 Pole
11.3.1 Global market from pole, 2018 - 2030
11.3.2 Global market from pole, by region, 2018 - 2030
11.4 Others
11.4.1 Global market from others, 2018 - 2030
11.4.2 Global market from others, by region, 2018 - 2030
Chapter 12 Distribution Transformer Market, By Application
12.1 Distribution transformer market share by application, 2021 & 2030
12.2 Residential & commercial
12.2.1 Global market from residential & commercial, 2018 - 2030
12.2.2 Global market from residential & commercial, by region, 2018 - 2030
12.3 Utility
12.3.1 Global market from utility, 2018 - 2030
12.3.2 Global market from utility, by region, 2018 - 2030
12.4 Industrial
12.4.1 Global market from industrial, 2018 - 2030
12.4.2 Global market from industrial, by region, 2018 - 2030
Chapter 13 Distribution Transformer Market, By Region
13.1 Distribution transformer market share by region, 2021 & 2030
13.2 North America
13.2.1 North America market, 2018 – 2030
13.2.2 North America market by core, 2018 – 2030
13.2.3 North America market by winding, 2018 – 2030
13.2.4 North America market by installation, 2018 – 2030
13.2.5 North America market by cooling, 2018 – 2030
13.2.5.1 North America market by dry type, 2018 – 2030
13.2.5.2 North America market by oil immersed, 2018 – 2030
13.2.6 North America market by insulation, 2018 – 2030
13.2.7 North America market by phase, 2018 – 2030
13.2.8 North America market by rating, 2018 – 2030
13.2.9 North America market by mounting, 2018 – 2030
13.2.10 North America market by application, 2018 – 2030
13.2.11 U.S.
13.2.11.1 U.S. market, 2018 – 2030
13.2.11.2 U.S. market by core, 2018 – 2030
13.2.11.3 U.S. market by winding, 2018 – 2030
13.2.11.4 U.S. market by installation, 2018 – 2030
13.2.11.5 U.S. market by cooling, 2018 – 2030
13.2.11.5.1 U.S. market by dry type, 2018 – 2030
13.2.11.5.2 U.S. market by oil immersed, 2018 – 2030
13.2.11.6 U.S. market by insulation, 2018 – 2030
13.2.11.7 U.S. market by phase, 2018 – 2030
13.2.11.8 U.S. market by rating, 2018 – 2030
13.2.11.9 U.S. market by mounting, 2018 – 2030
13.2.11.10 U.S. market by application, 2018 – 2030
13.2.12 Canada
13.2.12.1 Canada market, 2018 – 2030
13.2.12.2 Canada market by core, 2018 – 2030
13.2.12.3 Canada market by winding, 2018 – 2030
13.2.12.4 Canada market by installation, 2018 – 2030
13.2.12.5 Canada market by cooling, 2018 – 2030
13.2.12.5.1 Canada market by dry type, 2018 – 2030
13.2.12.5.2 Canada market by oil immersed, 2018 – 2030
13.2.12.6 Canada market by insulation, 2018 – 2030
13.2.12.7 Canada market by phase, 2018 – 2030
13.2.12.8 Canada market by rating, 2018 – 2030
13.2.12.9 Canada market by mounting, 2018 – 2030
13.2.12.10 Canada market by application, 2018 – 2030
13.2.13 Mexico
13.2.13.1 Mexico market, 2018 – 2030
13.2.13.2 Mexico market by core, 2018 – 2030
13.2.13.3 Mexico market by winding, 2018 – 2030
13.2.13.4 Mexico market by installation, 2018 – 2030
13.2.13.5 Mexico market by cooling, 2018 – 2030
13.2.13.5.1 Mexico market by dry type, 2018 – 2030
13.2.13.5.2 Mexico market by oil immersed, 2018 – 2030
13.2.13.6 Mexico market by insulation, 2018 – 2030
13.2.13.7 Mexico market by phase, 2018 – 2030
13.2.13.8 Mexico market by rating, 2018 – 2030
13.2.13.9 Mexico market by mounting, 2018 – 2030
13.2.13.10 Mexico market by application, 2018 – 2030
13.3 Europe
13.3.1 Europe market, 2018 – 2030
13.3.2 Europe market by core, 2018 – 2030
13.3.3 Europe market by winding, 2018 – 2030
13.3.4 Europe market by installation, 2018 – 2030
13.3.5 Europe market by cooling, 2018 – 2030
13.3.5.1 Europe market by dry type, 2018 – 2030
13.3.5.2 Europe market by oil immersed, 2018 – 2030
13.3.6 Europe market by insulation, 2018 – 2030
13.3.7 Europe market by phase, 2018 – 2030
13.3.8 Europe market by rating, 2018 – 2030
13.3.9 Europe market by mounting, 2018 – 2030
13.3.10 Europe market by application, 2018 – 2030
13.3.11 Germany
13.3.11.1 Germany market, 2018 – 2030
13.3.11.2 Germany market by core, 2018 – 2030
13.3.11.3 Germany market by winding, 2018 – 2030
13.3.11.4 Germany market by installation, 2018 – 2030
13.3.11.5 Germany market by cooling, 2018 – 2030
13.3.11.5.1 Germany market by dry type, 2018 – 2030
13.3.11.5.2 Germany market by oil immersed, 2018 – 2030
13.3.11.6 Germany market by insulation, 2018 – 2030
13.3.11.7 Germany market by phase, 2018 – 2030
13.3.11.8 Germany market by rating, 2018 – 2030
13.3.11.9 Germany market by mounting, 2018 – 2030
13.3.11.10 Germany market by application, 2018 – 2030
13.3.12 France
13.3.12.1 France market, 2018 – 2030
13.3.12.2 France market by core, 2018 – 2030
13.3.12.3 France market by winding, 2018 – 2030
13.3.12.4 France market by installation, 2018 – 2030
13.3.12.5 France market by cooling, 2018 – 2030
13.3.12.5.1 France market by dry type, 2018 – 2030
13.3.12.5.2 France market by oil immersed, 2018 – 2030
13.3.12.6 France market by insulation, 2018 – 2030
13.3.12.7 France market by phase, 2018 – 2030
13.3.12.8 France market by rating, 2018 – 2030
13.3.12.9 France market by mounting, 2018 – 2030
13.3.12.10 France market by application, 2018 – 2030
13.3.13 Russia
13.3.13.1 Russia market, 2018 – 2030
13.3.13.2 Russia market by core, 2018 – 2030
13.3.13.3 Russia market by winding, 2018 – 2030
13.3.13.4 Russia market by installation, 2018 – 2030
13.3.13.5 Russia market by cooling, 2018 – 2030
13.3.13.5.1 Russia market by dry type, 2018 – 2030
13.3.13.5.2 Russia market by oil immersed, 2018 – 2030
13.3.13.6 Russia market by insulation, 2018 – 2030
13.3.13.7 Russia market by phase, 2018 – 2030
13.3.13.8 Russia market by rating, 2018 – 2030
13.3.13.9 Russia market by mounting, 2018 – 2030
13.3.13.10 Russia market by application, 2018 – 2030
13.3.14 UK
13.3.14.1 UK market, 2018 – 2030
13.3.14.2 UK market by core, 2018 – 2030
13.3.14.3 UK market by winding, 2018 – 2030
13.3.14.4 UK market by installation, 2018 – 2030
13.3.14.5 UK market by cooling, 2018 – 2030
13.3.14.5.1 UK market by dry type, 2018 – 2030
13.3.14.5.2 UK market by oil immersed, 2018 – 2030
13.3.14.6 UK market by insulation, 2018 – 2030
13.3.14.7 UK market by phase, 2018 – 2030
13.3.14.8 UK market by rating, 2018 – 2030
13.3.14.9 UK market by mounting, 2018 – 2030
13.3.14.10 UK market by application, 2018 – 2030
13.3.15 Italy
13.3.15.1 Italy market, 2018 – 2030
13.3.15.2 Italy market by core, 2018 – 2030
13.3.15.3 Italy market by winding, 2018 – 2030
13.3.15.4 Italy market by installation, 2018 – 2030
13.3.15.5 Italy market by cooling, 2018 – 2030
13.3.15.5.1 Italy market by dry type, 2018 – 2030
13.3.15.5.2 Italy market by oil immersed, 2018 – 2030
13.3.15.6 Italy market by insulation, 2018 – 2030
13.3.15.7 Italy market by phase, 2018 – 2030
13.3.15.8 Italy market by rating, 2018 – 2030
13.3.15.9 Italy market by mounting, 2018 – 2030
13.3.15.10 Italy market by application, 2018 – 2030
13.3.16 Spain
13.3.16.1 Spain market, 2018 – 2030
13.3.16.2 Spain market by core, 2018 – 2030
13.3.16.3 Spain market by winding, 2018 – 2030
13.3.16.4 Spain market by installation, 2018 – 2030
13.3.16.5 Spain market by cooling, 2018 – 2030
13.3.16.5.1 Spain market by dry type, 2018 – 2030
13.3.16.5.2 Spain market by oil immersed, 2018 – 2030
13.3.16.6 Spain market by insulation, 2018 – 2030
13.3.16.7 Spain market by phase, 2018 – 2030
13.3.16.8 Spain market by rating, 2018 – 2030
13.3.16.9 Spain market by mounting, 2018 – 2030
13.3.16.10 Spain market by application, 2018 – 2030
13.3.17 Netherlands
13.3.17.1 Netherlands market, 2018 – 2030
13.3.17.2 Netherlands market by core, 2018 – 2030
13.3.17.3 Netherlands market by winding, 2018 – 2030
13.3.17.4 Netherlands market by installation, 2018 – 2030
13.3.17.5 Netherlands market by cooling, 2018 – 2030
13.3.17.5.1 Netherlands market by dry type, 2018 – 2030
13.3.17.5.2 Netherlands market by oil immersed, 2018 – 2030
13.3.17.6 Netherlands market by insulation, 2018 – 2030
13.3.17.7 Netherlands market by phase, 2018 – 2030
13.3.17.8 Netherlands market by rating, 2018 – 2030
13.3.17.9 Netherlands market by mounting, 2018 – 2030
13.3.17.10 Netherlands market by application, 2018 – 2030
13.4 Asia Pacific
13.4.1 Asia Pacific market, 2018 – 2030
13.4.2 Asia Pacific market by core, 2018 – 2030
13.4.3 Asia Pacific market by winding, 2018 – 2030
13.4.4 Asia Pacific market by installation, 2018 – 2030
13.4.5 Asia Pacific market by cooling, 2018 – 2030
13.4.5.1 Asia Pacific market by dry type, 2018 – 2030
13.4.5.2 Asia Pacific market by oil immersed, 2018 – 2030
13.4.6 Asia Pacific market by insulation, 2018 – 2030
13.4.7 Asia Pacific market by phase, 2018 – 2030
13.4.8 Asia Pacific market by rating, 2018 – 2030
13.4.9 Asia Pacific market by mounting, 2018 – 2030
13.4.10 Asia Pacific market by application, 2018 – 2030
13.4.11 China
13.4.11.1 China market, 2018 – 2030
13.4.11.2 China market by core, 2018 – 2030
13.4.11.3 China market by winding, 2018 – 2030
13.4.11.4 China market by installation, 2018 – 2030
13.4.11.5 China market by cooling, 2018 – 2030
13.4.11.5.1 China market by dry type, 2018 – 2030
13.4.11.5.2 China market by oil immersed, 2018 – 2030
13.4.11.6 China market by insulation, 2018 – 2030
13.4.11.7 China market by phase, 2018 – 2030
13.4.11.8 China market by rating, 2018 – 2030
13.4.11.9 China market by mounting, 2018 – 2030
13.4.11.10 China market by application, 2018 – 2030
13.4.12 Japan
13.4.12.1 Japan market, 2018 – 2030
13.4.12.2 Japan market by core, 2018 – 2030
13.4.12.3 Japan market by winding, 2018 – 2030
13.4.12.4 Japan market by installation, 2018 – 2030
13.4.12.5 Japan market by cooling, 2018 – 2030
13.4.12.5.1 Japan market by dry type, 2018 – 2030
13.4.12.5.2 Japan market by oil immersed, 2018 – 2030
13.4.12.6 Japan market by insulation, 2018 – 2030
13.4.12.7 Japan market by phase, 2018 – 2030
13.4.12.8 Japan market by rating, 2018 – 2030
13.4.12.9 Japan market by mounting, 2018 – 2030
13.4.12.10 Japan market by application, 2018 – 2030
13.4.13 South Korea
13.4.13.1 South Korea market, 2018 – 2030
13.4.13.2 South Korea market by core, 2018 – 2030
13.4.13.3 South Korea market by winding, 2018 – 2030
13.4.13.4 South Korea market by installation, 2018 – 2030
13.4.13.5 South Korea market by cooling, 2018 – 2030
13.4.13.5.1 South Korea market by dry type, 2018 – 2030
13.4.13.5.2 South Korea market by oil immersed, 2018 – 2030
13.4.13.6 South Korea market by insulation, 2018 – 2030
13.4.13.7 South Korea market by phase, 2018 – 2030
13.4.13.8 South Korea market by rating, 2018 – 2030
13.4.13.9 South Korea market by mounting, 2018 – 2030
13.4.13.10 South Korea market by application, 2018 – 2030
13.4.14 India
13.4.14.1 India market, 2018 – 2030
13.4.14.2 India market by core, 2018 – 2030
13.4.14.3 India market by winding, 2018 – 2030
13.4.14.4 India market by installation, 2018 – 2030
13.4.14.5 India market by cooling, 2018 – 2030
13.4.14.5.1 India market by dry type, 2018 – 2030
13.4.14.5.2 India market by oil immersed, 2018 – 2030
13.4.14.6 India market by insulation, 2018 – 2030
13.4.14.7 India market by phase, 2018 – 2030
13.4.14.8 India market by rating, 2018 – 2030
13.4.14.9 India market by mounting, 2018 – 2030
13.4.14.10 India market by application, 2018 – 2030
13.4.15 Australia
13.4.15.1 Australia market, 2018 – 2030
13.4.15.2 Australia market by core, 2018 – 2030
13.4.15.3 Australia market by winding, 2018 – 2030
13.4.15.4 Australia market by installation, 2018 – 2030
13.4.15.5 Australia market by cooling, 2018 – 2030
13.4.15.5.1 Australia market by dry type, 2018 – 2030
13.4.15.5.2 Australia market by oil immersed, 2018 – 2030
13.4.15.6 Australia market by insulation, 2018 – 2030
13.4.15.7 Australia market by phase, 2018 – 2030
13.4.15.8 Australia market by rating, 2018 – 2030
13.4.15.9 Australia market by mounting, 2018 – 2030
13.4.15.10 Australia market by application, 2018 – 2030
13.5 Middle East & Africa
13.5.1 Middle East & Africa market, 2018 – 2030
13.5.2 Middle East & Africa market by core, 2018 – 2030
13.5.3 Middle East & Africa market by winding, 2018 – 2030
13.5.4 Middle East & Africa market by installation, 2018 – 2030
13.5.5 Middle East & Africa market by cooling, 2018 – 2030
13.5.5.1 Middle East & Africa market by dry type, 2018 – 2030
13.5.5.2 Middle East & Africa market by oil immersed, 2018 – 2030
13.5.6 Middle East & Africa market by insulation, 2018 – 2030
13.5.7 Middle East & Africa market by phase, 2018 – 2030
13.5.8 Middle East & Africa market by rating, 2018 – 2030
13.5.9 Middle East & Africa market by mounting, 2018 – 2030
13.5.10 Middle East & Africa market by application, 2018 – 2030
13.5.11 Saudi Arabia
13.5.11.1 Saudi Arabia market, 2018 – 2030
13.5.11.2 Saudi Arabia market by core, 2018 – 2030
13.5.11.3 Saudi Arabia market by winding, 2018 – 2030
13.5.11.4 Saudi Arabia market by installation, 2018 – 2030
13.5.11.5 Saudi Arabia market by cooling, 2018 – 2030
13.5.11.5.1 Saudi Arabia market by dry type, 2018 – 2030
13.5.11.5.2 Saudi Arabia market by oil immersed, 2018 – 2030
13.5.11.6 Saudi Arabia market by insulation, 2018 – 2030
13.5.11.7 Saudi Arabia market by phase, 2018 – 2030
13.5.11.8 Saudi Arabia market by rating, 2018 – 2030
13.5.11.9 Saudi Arabia market by mounting, 2018 – 2030
13.5.11.10 Saudi Arabia market by application, 2018 – 2030
13.5.12 UAE
13.5.12.1 UAE market, 2018 – 2030
13.5.12.2 UAE market by core, 2018 – 2030
13.5.12.3 UAE market by winding, 2018 – 2030
13.5.12.4 UAE market by installation, 2018 – 2030
13.5.12.5 UAE market by cooling, 2018 – 2030
13.5.12.5.1 UAE market by dry type, 2018 – 2030
13.5.12.5.2 UAE market by oil immersed, 2018 – 2030
13.5.12.6 UAE market by insulation, 2018 – 2030
13.5.12.7 UAE market by phase, 2018 – 2030
13.5.12.8 UAE market by rating, 2018 – 2030
13.5.12.9 UAE market by mounting, 2018 – 2030
13.5.12.10 UAE market by application, 2018 – 2030
13.5.13 Qatar
13.5.13.1 Qatar market, 2018 – 2030
13.5.13.2 Qatar market by core, 2018 – 2030
13.5.13.3 Qatar market by winding, 2018 – 2030
13.5.13.4 Qatar market by installation, 2018 – 2030
13.5.13.5 Qatar market by cooling, 2018 – 2030
13.5.13.5.1 Qatar market by dry type, 2018 – 2030
13.5.13.5.2 Qatar mar