Table of Content

Executive Summary
1 MARKETS
1.1 Industry Outlook
1.1.1 Trends: Industry Dynamics Defining the Future Trends of Metal 3D Printing Market
1.1.1.1 Increasing Demand from Aerospace and Healthcare Sectors
1.1.2 Supply Chain Analysis
1.1.3 Industry Attractiveness
1.1.3.1 Threat of New Entrants (Moderate)
1.1.3.2 Bargaining Power of Buyers (Moderate)
1.1.3.3 Bargaining Power of Suppliers (Moderate)
1.1.3.4 Threat of Substitutes (Moderate)
1.1.3.5 Intensity of Competitive Rivalry (Moderate)
1.1.4 Supply and Demand Analysis
1.1.5 Profit Margin Analysis
1.1.5.1 Reduction in the Initial Investments Required for Setting Up the Technology
1.1.5.2 Business Expansion Through Installation of New Production Facilities
1.1.5.3 Increasing Partnerships and Collaborations Among the Market Players, Research Centers, and Educational Institutions
1.1.5.4 Increasing Production to Higher Volumes
1.1.5.5 Research and Development Initiatives
1.1.6 Ecosystem/Ongoing Programs
1.1.6.1 Consortiums and Associations
1.1.6.2 Regulatory Bodies
1.1.6.3 Government Programs
1.1.6.4 Programs by Research Institutions and Universities
1.2 Business Dynamics
1.2.1 Business Drivers
1.2.1.1 Cost-Effectiveness, Greater Design Flexibility and Lower Wastage
1.2.1.1.1 Cost-Effectiveness
1.2.1.1.2 Greater Design Flexibility
1.2.1.1.3 Low Wastage
1.2.1.2 Reduced Prices of Metal 3D Printers Coupled with Advanced Raw Materials
1.2.1.2.1 Reduced Price of Metal 3D Printers
1.2.1.2.2 Advanced Raw Materials
1.2.1.3 Increasing Investments in Research and Development (R&D)
1.2.2 Business Restraints
1.2.2.1 High Costs of Metal Powders and Industry Grade 3D Printers
1.2.2.1.1 High Cost of Metal Powders
1.2.2.1.2 High Cost of Industry Grade Metal 3D Printers
1.2.2.2 Inferior Technical Properties as Compared to Conventionally Manufactured Products
1.2.2.2.1 Lower Strength
1.2.2.2.2 Residual Stress and Cracking
1.2.2.2.3 Heat Build-Up and Oxidation
1.2.2.2.4 Surface Finish
1.2.2.2.5 Porosity
1.2.2.2.6 Accuracy
1.2.3 Business Challenges
1.2.3.1 Technological Challenges Faced in Metal 3D Printing
1.2.3.1.1 Slow Production Speeds
1.2.3.1.2 Materials Development and Inconsistencies in Material Properties
1.2.3.1.3 Manual Post-Processing
1.2.3.2 Software Challenges in Metal 3D Printing
1.2.3.2.1 Limited Capabilities in Data Preparation and Design
1.2.3.3 Quality Assurance Challenges in Metal 3D Printing
1.2.3.3.1 Part-to-Part Variation
1.2.3.3.2 Lack of Industry-Wide Standards
1.2.3.4 Workforce Challenges in Metal 3D Printing
1.2.3.4.1 Lack of Understanding and Expertise in Additive Manufacturing
1.2.3.5 Financial Challenges in Metal 3D Printing
1.2.3.5.1 Making the Initial Investment
1.2.3.6 Workflow and Integration Challenges in Metal 3D Printing
1.2.3.6.1 Disjointed AM Ecosystem
1.2.3.6.2 Lack of Digital Infrastructure
1.2.3.7 Impact of COVID-19
1.2.4 Business Strategies
1.2.4.1 Product Developments
1.2.4.2 Market Developments
1.2.5 Corporate Strategies
1.2.5.1 Mergers and Acquisitions
1.2.5.2 Partnerships, Collaborations, and Joint Ventures
1.2.6 Business Opportunities
1.2.6.1 Growing Adoption of Metals Used for Specific Applications in Aerospace and Defense Sector
1.2.6.2 Producing High Quality Metal Powder with Enhanced Quality
1.2.6.3 Increased Demand from Healthcare Sector Due to Impact of COVID-19
2 APPLICATIONS
2.1 Global Metal 3D Printing Market (by Application), Analysis and Forecast (2018-2025)
2.1.1 Market Overview
2.1.1.1 Aerospace and Defense
2.1.1.1.1 Improved Development Cycles
2.1.1.1.2 Designing of Complex Parts
2.1.1.1.3 Design Consolidation
2.1.1.1.4 Manufacturing of Spares
2.1.1.1.5 Weight Reduction
2.1.1.1.6 Efficiency of the Materials
2.1.1.1.7 Assurance of in-Process Quality
2.1.1.2 Medical and Healthcare
2.1.1.3 Automotive
2.1.1.4 Other (Construction, Tool and Die, General Engineering)
3 PRODUCTS
3.1 Global Metal 3D Printing Market (by Type), Analysis and Forecast (2019-2025)
3.1.1 Market Overview
3.2 Global Metal 3D Printing Market (by 3D Printable Metals and Alloys)
3.2.1.1 Titanium and Its Alloys
3.2.1.1.1 Complexity of Parts
3.2.1.1.2 Strength-Weight Ratio
3.2.1.1.2.1 Aerospace
3.2.1.1.2.2 Automotive
3.2.1.1.3 High-Temperature Strengths
3.2.1.1.4 Biocompatibility
3.2.1.1.5 Reduced Wastage
3.2.1.1.6 Reduced Printing Time
3.2.1.2 Aluminum and Its Alloys
3.2.1.3 Steels
3.2.1.4 Nickel and Its Alloys
3.2.1.5 Other Alloys
3.3 Global Metal 3D Printing Market (by Type of Raw Material Used in 3D Printing)
3.3.1 Powder-Based Raw Material
3.3.2 Resin-Based Raw Material
3.3.3 Lamina-Based Raw Material
3.3.4 Filament/Wire-Based Raw Material
4 TECHNOLOGY
4.1 Global Metal 3D Printing Market (by Technology)
4.1.1 Market Overview
4.1.2 Global Powder-Bed Fusion Metal 3D Printing Market
4.1.2.1 Global Selective Laser Sintering (SLS) Market
4.1.2.2 Global Selective Laser Melting (SLM) Market
4.1.2.3 Global Direct Metal Laser Sintering (DMLS) Market
4.1.2.4 Global Direct Metal Laser Melting (DMLM) Market
4.1.2.5 Global Direct Metal Printing (DMP) Market
4.1.2.6 Global Laser CUSING Market
4.1.2.7 Global Laser Metal Fusion (LMF) Market
4.1.3 Global Material/Binder Jetting Metal 3D Printing Market
4.1.3.1 Global Magnet-o-Jet Metal 3D Printing Market
4.1.3.2 Global Nano Particle Jetting Metal 3D Printing Market
4.1.3.3 Global Single Pass Jetting Market
4.1.3.4 Global Metal Jet Market
4.1.4 Global Direct Energy Deposition (DED) Metal 3D Printing Market
4.1.4.1 Global Direct Metal Tooling (DMT) Metal 3D Printing Market
4.1.4.2 Global Electron Beam Additive Manufacturing (EBAM) Metal 3D Printing Market
4.1.4.3 Global Electron Beam Melting (EBM) Metal 3D Printing Market
4.1.4.4 Global Laser Engineered Net Shaping (LENS) Metal 3D Printing Market
4.1.4.5 Global Laser Metal Deposition (LMD) Metal 3D Printing Market
4.1.5 Global Extrusion Metal 3D Printing Market
4.1.5.1 Global Atomic Diffusion Additive Manufacturing (ADAM) Metal 3D Printing Market
4.1.5.2 Global Composite Extrusion Modelling (CEM) Metal 3D Printing Market
4.1.5.3 Global Fused Deposition Modelling (FDM) Metal 3D Printing Market
4.1.5.4 Global Fused Filament Fabrication (FFF) Metal 3D printing market
4.1.5.5 Global Bound Metal Deposition (BMD) Metal 3D Printing Market
4.1.5.6 Global Metal Injection Molding (MIM) Metal 3D Printing Market
4.1.5.7 Global Selective Powder Deposition (SPD) Metal 3D Printing Market
4.1.6 Others (Resin-Based and Sheet Lamination-Based Metal 3D Printing)
4.1.7 Global Resin-Based Metal 3D Printing Market
4.1.7.1 Global Digital Light Processing (DLP) Metal 3D Printing Market
4.1.7.2 Global FluidFM Micro Metal 3D Printing Market
4.1.8 Global Sheet Lamination Metal 3D Printing Market
4.1.8.1 Global Ultrasonic Additive Manufacturing (UAM) Metal 3D Printing Market
4.2 Product Benchmarking: Growth Rate – Market Share Matrix
4.2.1 Opportunity Matrix (by Region)
4.2.2 Opportunity Matrix (by Product Type)
4.3 Patent Analysis
4.3.1 Patent Analysis (by Status)
4.3.2 Patent Analysis (by Company)
4.3.3 Patent Analysis (by Type of Metals/Alloys Used in Metal 3D Printing)
5 REGIONS
5.1 Global Metal 3D Printing Market (by Region), Analysis and Forecast (2019-2025)
5.2 NORTH AMERICA
5.2.1 Markets
5.2.1.1 Key Manufacturers in North America
5.2.1.2 Competitive Benchmarking
5.2.1.3 Business Challenges
5.2.1.4 Business Drivers
5.2.1.5 Applications
5.2.1.5.1 North America Metal 3D Printing Market (by Application), Value Data
5.2.1.6 Products
5.2.1.6.1 North America Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
5.2.1.6.2 North America Metal 3D Printing Market (by Technology), $Million, 2019-2025
5.2.2 NORTH AMERICA (BY COUNTRY)
5.2.2.1 U.S.
5.2.2.2 Markets
5.2.2.2.1 Buyer Attributes
5.2.2.2.2 Key Manufacturers and Suppliers in the U.S.
5.2.2.2.3 Business Challenges
5.2.2.2.4 Business Drivers
5.2.2.2.5 Applications
5.2.2.2.5.1 U.S. Metal 3D Printing Market (by Application), Value Data
5.2.2.2.6 Products
5.2.2.2.6.1 U.S. Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
5.2.2.3 CANADA
5.2.2.4 Markets
5.2.2.4.1 Buyer Attributes
5.2.2.4.2 Key Manufacturers and Suppliers in Canada
5.2.2.4.3 Business Challenges
5.2.2.4.4 Business Drivers
5.2.2.4.5 Applications
5.2.2.4.5.1 Canada Metal 3D Printing Market (by Application), Value Data
5.2.2.4.6 Products
5.2.2.4.6.1 Canada Metal 3d Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
5.2.2.5 MEXICO
5.2.2.5.1 Markets
5.2.2.5.1.1 Buyer Attributes
5.2.2.5.1.2 Key Manufacturers and Suppliers in Mexico
5.2.2.5.1.3 Business Challenges
5.2.2.5.1.4 Business Drivers
5.2.2.5.2 Applications
5.2.2.5.2.1 Mexico Metal 3D Printing Market (by Application), $Million, 2019-2025
5.2.2.5.3 Products
5.2.2.5.3.1 Mexico Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
5.3 ASIA-PACIFIC JAPAN (APJ)
5.3.1 Markets
5.3.1.1 Key Manufacturers and Suppliers in Asia-Pacific Japan (APJ)
5.3.1.2 Competitive Benchmarking
5.3.1.3 Business Challenges
5.3.1.4 Business Drivers
5.3.1.4.1 Applications
5.3.1.4.1.1 Asia-Pacific Japan (APJ) Metal 3D Printing Market (by Application), Value Data
5.3.1.4.2 Products
5.3.1.4.2.1 Asia-Pacific Japan (APJ) Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
5.3.1.4.2.2 Asia-Pacific Japan (APJ) Metal 3D Printing Market (by Technology), $Million, 2019-2025
5.3.2 ASIA-PACIFIC JAPAN (APJ) (BY COUNTRY)
5.3.2.1 JAPAN
5.3.2.2 Markets
5.3.2.2.1 Buyer Attributes
5.3.2.2.2 Key Manufacturers and Suppliers in Japan
5.3.2.2.3 Business Challenges
5.3.2.2.4 Business Drivers
5.3.2.2.5 Applications
5.3.2.2.5.1 Japan Metal 3D Printing Market (by Application), Value Data
5.3.2.2.6 Products
5.3.2.2.6.1 Japan Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
5.3.2.3 INDIA
5.3.2.3.1 Markets
5.3.2.3.2 Buyer Attributes
5.3.2.3.2.1 Key Manufacturers and Suppliers in India
5.3.2.3.2.2 Business Challenges
5.3.2.3.2.3 Business Drivers
5.3.2.3.3 Applications
5.3.2.3.3.1 India Metal 3D Printing Market (by Application), Value Data
5.3.2.3.4 Products
5.3.2.3.4.1 India Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
5.3.2.4 SOUTH KOREA
5.3.2.4.1 Markets
5.3.2.4.1.1 Buyer Attributes
5.3.2.4.1.2 Key Manufacturers and Suppliers in South Korea
5.3.2.4.1.3 Business Challenges
5.3.2.4.1.4 Business Drivers
5.3.2.4.2 Applications
5.3.2.4.2.1 South Korea Metal 3D Printing Market (by Application), Value Data
5.3.2.4.3 Products
5.3.2.4.3.1 South Korea Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
5.3.2.5 AUSTRALIA & NEW ZEALAND
5.3.2.5.1 Markets
5.3.2.5.1.1 Buyer Attributes
5.3.2.5.1.2 Key Manufacturers and Suppliers in Australia & New Zealand
5.3.2.5.1.3 Business Challenges
5.3.2.5.1.4 Business Drivers
5.3.2.5.2 Applications
5.3.2.5.2.1 Australia & New Zealand Metal 3D Printing Market (by Application), Value Data
5.3.2.5.3 Products
5.3.2.5.3.1 Australia & New Zealand Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
5.3.2.6 SINGAPORE
5.3.2.6.1 Markets
5.3.2.6.1.1 Buyer Attributes
5.3.2.6.1.2 Key Manufacturers and Suppliers in Singapore
5.3.2.6.1.3 Business Challenges
5.3.2.6.1.4 Business Drivers
5.3.2.6.2 Applications
5.3.2.6.2.1 Singapore Metal 3D Printing Market (by Application), Value Data
5.3.2.6.3 Products
5.3.2.6.3.1 Singapore Metal 3D Printing Market ((by 3D Printable Metals and Alloys), $Million, 2019-2025
5.3.2.7 TAIWAN
5.3.2.7.1 Markets
5.3.2.7.1.1 Buyer Attributes
5.3.2.7.1.2 Key Manufacturers and Suppliers in Taiwan
5.3.2.7.1.3 Business Challenges
5.3.2.7.1.4 Business Drivers
5.3.2.7.2 Applications
5.3.2.7.2.1 Taiwan Metal 3D Printing Market (by Application), Value Data
5.3.2.7.3 Products
5.3.2.7.3.1 Taiwan Metal 3D Printing Market ((by 3D Printable Metals and Alloys), $Million, 2019-2025
5.3.2.8 Rest-of-APJ
5.3.2.8.1 Markets
5.3.2.8.1.1 Buyer Attributes
5.3.2.8.1.2 Key Manufacturers and Suppliers in Rest-of-APJ
5.3.2.8.1.3 Business Challenges
5.3.2.8.1.4 Business Drivers
5.3.2.8.2 Applications
5.3.2.8.2.1 Rest-of-APJ Metal 3D Printing Market (by Application), Value Data
5.3.2.8.3 Products
5.3.2.8.3.1 Rest of APJ Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
5.4 CHINA
5.4.1 Markets
5.4.1.1 Key Manufacturers and Suppliers in China
5.4.1.2 Competitive Benchmarking
5.4.1.3 Business Challenges
5.4.1.4 Business Drivers
5.4.1.5 Applications
5.4.1.5.1 China Metal 3D Printing Market (by Application), Value Data
5.4.1.6 Products
5.4.1.6.1 China Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
5.4.1.6.2 China Metal 3D Printing Market (by Technology), $Million, 2019-2025
5.5 EUROPE
5.5.1 Markets
5.5.1.1 Key Manufacturers and Suppliers in Europe
5.5.1.2 Competitive Benchmarking
5.5.1.3 Business Challenges
5.5.1.4 Business Drivers
5.5.1.5 Applications
5.5.1.5.1 Europe Metal 3D Printing Market (by Application), Value Data
5.5.1.6 Products
5.5.1.6.1 Europe Metal 3D Printing Market ((by 3D Printable Metals and Alloys), $Million, 2019-2025
5.5.1.6.2 Europe Metal 3D Printing Market (by Technology), $Million, 2019-2025
5.5.2 EUROPE (BY COUNTRY)
5.5.2.1 GERMANY
5.5.2.1.1 Markets
5.5.2.1.1.1 Buyer Attributes
5.5.2.1.1.2 Key Manufacturers and Suppliers in Germany
5.5.2.1.1.3 Business Challenges
5.5.2.1.1.4 Business Drivers
5.5.2.1.2 Applications
5.5.2.1.2.1 Germany Metal 3D Printing Market (by Application), Value Data
5.5.2.1.3 Products
5.5.2.1.3.1 Germany Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
5.5.2.2 FRANCE
5.5.2.2.1 Markets
5.5.2.2.1.1 Buyer Attributes
5.5.2.2.1.2 Key Manufacturers and Suppliers in France
5.5.2.2.1.3 Business Challenges
5.5.2.2.1.4 Business Drivers
5.5.2.2.2 Applications
5.5.2.2.2.1 France Metal 3D Printing Market (by Application), Value Data
5.5.2.2.3 Products
5.5.2.2.3.1 France Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
5.5.2.3 ITALY
5.5.2.3.1 Markets
5.5.2.3.1.1 Buyer Attributes
5.5.2.3.1.2 Key Manufacturers and Suppliers in Italy
5.5.2.3.1.3 Business Challenges
5.5.2.3.1.4 Business Drivers
5.5.2.3.2 Applications
5.5.2.3.2.1 Italy Metal 3D Printing Market (by Application), Value and Volume Data
5.5.2.3.3 Products
5.5.2.3.3.1 Italy Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
5.5.2.4 SPAIN
5.5.2.4.1 Markets
5.5.2.4.1.1 Buyer Attributes
5.5.2.4.1.2 Key Manufacturers and Suppliers in Spain
5.5.2.4.1.3 Business Challenges
5.5.2.4.1.4 Business Drivers
5.5.2.4.2 Applications
5.5.2.4.2.1 Spain Metal 3D Printing Market (by Application), Value Data
5.5.2.4.3 Products
5.5.2.4.3.1 Spain Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
5.5.2.5 NETHERLANDS
5.5.2.5.1 Markets
5.5.2.5.1.1 Buyer Attributes
5.5.2.5.1.2 Key Manufacturers and Suppliers in the Netherlands
5.5.2.5.1.3 Business Challenges
5.5.2.5.1.4 Business Drivers
5.5.2.5.2 Applications
5.5.2.5.2.1 Netherlands Metal 3D Printing Market (by Application), Value Data
5.5.2.5.3 Products
5.5.2.5.3.1 Netherlands Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
5.5.2.6 Rest-of-Europe (RoE)
5.5.2.6.1 Markets
5.5.2.6.1.1 Buyer Attributes
5.5.2.6.1.2 Key Manufacturers and Suppliers in the Rest-of-Europe (RoE)
5.5.2.6.1.3 Business Challenges
5.5.2.6.1.4 Business Drivers
5.5.2.6.2 Applications
5.5.2.6.2.1 Rest-of-Europe (RoE) Metal 3D Printing Market (by Application), Value Data
5.5.2.6.3 Products
5.5.2.6.3.1 Rest-of-Europe (RoE) Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
5.6 U.K.
5.6.1.1 Key Manufacturers and Suppliers in the U.K.
5.6.1.2 Competitive Benchmarking
5.6.1.3 Business Challenges
5.6.1.4 Business Drivers
5.6.1.4.1 Applications
5.6.1.4.1.1 U.K. Metal 3D Printing Market (by Application), Value Data
5.6.1.4.2 Products
5.6.1.4.2.1 U.K. Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
5.6.1.4.2.2 U.K. Metal 3D Printing Market (by Technology), $Million, 2019-2025
5.7 REST-OF-THE-WORLD (ROW)
5.7.1 Markets
5.7.1.1 Key Manufacturers and Suppliers in the Rest-of-the-World (RoW)
5.7.1.2 Competitive Benchmarking
5.7.1.3 Business Challenges
5.7.1.4 Business Drivers
5.7.1.5 Applications
5.7.1.5.1 Rest-of-the-World (RoW) Metal 3D Printing Market (by Application), $Million, 2019-2025
5.7.1.5.2 Products
5.7.1.5.2.1 Rest-of-the-World (RoW) Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
5.7.1.5.2.2 Rest-of-the-World (RoW) Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
5.7.2 REST-OF-THE-WORLD (BY COUNTRY)
5.7.2.1 SOUTH AMERICA
5.7.2.1.1 Markets
5.7.2.1.1.1 Buyer Attributes
5.7.2.1.1.2 Key Manufacturers and Suppliers in South America
5.7.2.1.1.3 Business Challenges
5.7.2.1.1.4 Business Drivers
5.7.2.1.2 Applications
5.7.2.1.2.1 South America Metal 3D Printing Market (by Application), Value Data
5.7.2.1.3 Products
5.7.2.1.3.1 South America Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
5.7.2.2 MIDDLE EAST & AFRICA (MEA)
5.7.2.2.1 Markets
5.7.2.2.1.1 Buyer Attributes
5.7.2.2.1.2 Key Manufacturers and Suppliers in Middle East & Africa (MEA)
5.7.2.2.1.3 Business Challenges
5.7.2.2.1.4 Business Drivers
5.7.2.2.2 Applications
5.7.2.2.2.1 Middle East & Africa (MEA) Metal 3D Printing Market (by Application), Value Data
5.7.2.2.3 Products
5.7.2.2.3.1 Middle East & Africa (MEA) Metal 3D Printing Market (by 3D Printable Metals and Alloys), $Million, 2019-2025
6 MARKETS - Competitive Benchmarking and Company Profiles
6.1 Competitive Benchmarking
Company Profiles
6.2 Oerlikon
6.2.1 Company Overview
6.2.1.1 Product Portfolio
6.2.1.2 Production Sites
6.2.1 Business Strategies
6.2.1.2 Product Developments
6.2.1.3 Market Developments
6.2.2 Corporate Strategies
6.2.2.2 Mergers and Acquisitions
6.2.2.3 Partnerships, Collaborations, and Joint Ventures
6.2.3 R&D and Patent Analysis
6.2.4 Competitive Position
6.2.4.1 Strengths of Oerlikon in the Global Metal 3D Printing Market
6.2.4.2 Weaknesses of Oerlikon in the Global Metal 3D Printing Market
6.3 Aubert & Duval
6.3.1 Company Overview
6.3.1.1 Product Portfolio
6.3.1.2 Production Sites
6.3.2 Corporate Strategies
6.3.2.1 Partnerships, Collaborations, and Joint Ventures
6.3.3 Research and Development (R&D) and Patent Analysis
6.3.4 Competitive Position
6.3.4.1 Strengths of Aubert & Duval in the Global Metal 3D Printing Market
6.3.4.2 Weaknesses of Aubert & Duval in the Global Metal 3D Printing Market
6.4 Carpenter Technology Corporation
6.4.1 Company Overview
6.4.1.1 Product Portfolio
6.4.1.2 Production Sites of Carpenter powder products
6.4.2 Business Strategies
6.4.2.1 Market Developments
6.4.3 Corporate Strategies
6.4.3.1 Mergers and Acquisitions
6.4.4 Research and Development (R&D) and Patent Analysis
6.4.5 Competitive Position
6.4.5.1 Strengths of Carpenter Technology Corporation in the Global Metal 3D Printing Market
6.4.5.2 Weaknesses of Carpenter Technology Corporation in the Global Metal 3D Printing Market
6.5 Sandvik AB
6.5.1 Company Overview
6.5.1.1 Product Portfolio
6.5.1.2 Production Sites
6.5.2 Business Strategies
6.5.2.1 Product Developments
6.5.2.2 Market Developments (2017-2020)
6.5.3 Corporate Strategies
6.5.3.1 Mergers and Acquisitions
6.5.3.2 Partnerships, Collaborations, and Joint Ventures
6.5.4 Research and Development (R&D) and Patent Analysis
6.5.5 Competitive Position
6.5.5.1 Strengths of Sandvik AB in the Global Metal 3D Printing Market
6.5.5.2 Weaknesses of Sandvik AB in the Global Metal 3D Printing Market
6.6 Linde
6.6.1 Company Overview
6.6.1.1 Product Portfolio
6.6.1.2 Global Presence
6.6.2 Corporate Strategies
6.6.2.1 Mergers and Acquisitions
6.6.2.2 Partnerships, Collaborations and Joint Ventures
6.6.3 Research and Development (R&D) Analysis
6.6.3.1 Research and Development (R&D) Analysis of Praxair, Inc.
6.6.3.2 Research and Development (R&D) Analysis of Linde AG
6.6.4 Competitive Position
6.6.4.1 Strengths of Linde in the Global Metal 3D Printing Market
6.6.4.2 Weaknesses of Linde in the Global Metal 3D Printing Market
6.7 Renishaw plc
6.7.1 Company Overview
6.7.1.1 Product Portfolio
6.7.1.2 Production Sites
6.7.2 Business Strategies
6.7.2.1 Product Developments
6.7.3 Corporate Strategies
6.7.3.1 Partnerships, Collaborations, and Joint Ventures
6.7.4 Research and Development (R&D) and Patent Analysis
6.7.5 Competitive Position
6.7.5.1 Strengths of Renishaw plc in the Global Metal 3D Printing Market
6.7.5.2 Weaknesses of Renishaw plc in the Global Metal 3D Printing Market
6.8 Materialise
6.8.1 Company Overview
6.8.1.1 Product Portfolio
6.8.1.2 Production Sites
6.8.2 Business Strategies
6.8.2.1 Product Developments
6.8.2.2 Market Developments
6.8.3 Corporate Strategies
6.8.3.1 Mergers and Acquisitions
6.8.3.2 Partnerships, Collaborations, and Joint Ventures
6.8.4 Research and Development (R&D) and Patent Analysis
6.8.5 Competitive Position
6.8.5.1 Strengths of Materialise in the Global Metal 3D Printing Market
6.8.5.2 Weaknesses of Materialise in the Global Metal 3D Printing Market
6.9 GENERAL ELECTRIC
6.9.1 Company Overview
6.9.1.1 Product Portfolio
6.9.1.2 Manufacturing Plants
6.9.2 Business Strategies
6.9.2.1 Product Developments
6.9.2.2 Market Developments (2017-2020)
6.9.3 Corporate Strategies
6.9.3.1 Mergers and Acquisitions
6.9.3.2 Partnerships, Collaborations, and Joint Ventures
6.9.4 Research and Development (R&D) and Patent Analysis
6.9.5 Competitive Position
6.9.5.1 Strengths of GENERAL ELECTRIC in the Global Metal 3D Printing Market
6.9.5.2 Weaknesses of GENERAL ELECTRIC in the Global Metal 3D Printing Market
6.1 DMG MORI
6.10.1 Company Overview
6.10.1.1 Product Portfolio
6.10.1.2 Production Sites
6.10.2 Business Strategies
6.10.2.1 Product Developments
6.10.2.2 Market Developments (2017-2020)
6.10.3 Corporate Strategies
6.10.3.1 Mergers and Acquisitions
6.10.3.2 Partnerships, Collaborations, and Joint Ventures
6.10.4 Research and Development (R&D) and Patent Analysis
6.10.5 Competitive Position
6.10.5.1 Strengths of DMG MORI in the Global Metal 3D Printing Market
6.10.5.2 Weaknesses of DMG MORI in the Global Metal 3D Printing Market
6.11 SLM Solutions
6.11.1 Company Overview
6.11.1.1 Product Portfolio
6.11.1.2 Global Presence
6.11.2 Business Strategies
6.11.2.1 Product Developments
6.11.2.2 Market Developments
6.11.3 Corporate Strategies
6.11.3.1 Partnerships, Collaborations, and Joint Ventures
6.11.4 Research and Development (R&D)
6.11.5 Competitive Position
6.11.5.1 Strengths of SLM Solutions in the Global Metal 3D Printing Market
6.11.5.2 Weaknesses of SLM Solutions in the Global Metal 3D Printing Market
6.12 Intech Additive Solutions Pvt. Ltd.
6.12.1 Company Overview
6.12.1.1 Product Portfolio
6.12.2 Business Strategies
6.12.2.1 Product Developments
6.12.3 Corporate Strategies
6.12.3.1 Mergers and Acquisitions
6.12.3.2 Partnerships, Collaborations, and Joint Ventures
6.12.4 Competitive Position
6.12.4.1 Strengths of Intech Additive Solutions Pvt. Ltd. in the Global Metal 3D Printing Market
6.12.4.2 Weaknesses of Intech Additive Solutions Pvt. Ltd. In the Global Metal 3D Printing Market
6.13 3D Systems, Inc.
6.13.1 Company Overview
6.13.1.1 Product Portfolio
6.13.1.2 Global Presence
6.13.2 Business Strategies
6.13.2.1 Product Developments
6.13.2.2 Market Developments (2017-2020)
6.13.3 Corporate Strategies
6.13.3.1 Partnerships, Collaborations, and Joint Ventures
6.13.4 Research & Development (R&D) and Patent Analysis
6.13.5 Competitive Position
6.13.5.1 Strengths of 3D Systems, Inc. in the Global Metal 3D Printing Market
6.13.5.2 Weaknesses of 3D Systems, Inc. in the Global Metal 3D Printing Market
6.14 TRUMPF
6.14.1 Company Overview
6.14.1.1 Product Portfolio
6.14.1.2 Production sites
6.14.2 Business Strategies
6.14.2.1 Product Developments
6.14.3 Market Developments (2017-2020)
6.14.3.1 Corporate Strategies
6.14.3.1.1 Partnerships, Collaborations, and Joint Ventures
6.14.3.2 Research and Development (R&D) and Patent Analysis
6.14.4 Competitive Position
6.14.4.1 Strengths of TRUMPF in the Global Metal 3D Printing Market
6.14.4.2 Weaknesses of TRUMPF in the Global Metal 3D Printing Market
6.15 HP Development Company, L.P.
6.15.1 Company Overview
6.15.1.1 Product Portfolio
6.15.1.2 Production sites
6.15.2 Business Strategies
6.15.2.1 Product Developments
6.15.2.2 Market Developments
6.15.3 Corporate Strategies
6.15.3.1 Partnerships, Collaborations, and Joint Ventures
6.15.4 Research and Development (R&D) and Patent Analysis
6.15.5 Competitive Position
6.15.5.1 Strengths of HP Development Company, L.P. in the Global Metal 3D Printing Market
6.15.5.2 Weaknesses of HP Development Company, L.P. in the Global Metal 3D Printing Market
6.16 STRATASYS LTD.
6.16.1 Company Overview
6.16.1.1 Product Portfolio
6.16.1.2 Global Presence
6.16.2 Business Strategies
6.16.2.1 Product Developments
6.16.3 Corporate Strategies
6.16.3.1 Partnerships, Collaborations, and Joint Ventures
6.16.4 Research and Development (R&D) and Patent Analysis
6.16.5 Competitive Position
6.16.5.1 Strengths of STRATASYS LTD. in the Global Metal 3D Printing Market
6.16.5.2 Weaknesses of STRATASYS LTD. in the Global Metal 3D Printing Market
6.17 Other Key Players
7 Research Methodology
7.1 Data Sources
7.1.1 Primary Data Sources
7.1.2 Secondary Data Sources
7.1.3 Data Triangulation
7.2 Market Estimation & Forecast
7.2.1 Factors for Data Prediction and Modeling